2.4H x 1.2W Palisade Single Gate- From £460.00 – £ 580.00 Excl VAT
2.4H x 1.2W Palisade Single Gate will Control and secure your palisade fence access points. We design and manufacture the gates in our West Midlands facility using the same materials as our palisade fence system, ensuring a seamless and integrated look.
| Gate leaf height | 2350mm |
| Between post width | 1200mm |
| Overall post width | 1340mm |
| Post size | 80×80 SHS |
- Galvanised and powder coated
- 100° opening inwards & outwards
- Concrete-in gate posts
- Nominal ground clearance 50mm
- Adjustable gate eyes, weld-on hooks & lugs
- Slide latch with padlock holes
- Drop bars
The 2.4m H x 1.2m W pedestrian palisade gate has been created to provide a safe and secure point of entry for pedestrians, reducing the risk of accidents by separating on foot and vehicular access.
Palisade fencing is a strong and robust form of fencing which can be seen providing security for sites around the UK and the world. It is constructed from a series of vertical pales which are held in place by rails which run horizontally between each post along the top and bottom of the fencing. This design helps to provide your site with a good level of visibility without compromising on security.
Each Pedestrian palisade gate has been designed to be incredibly strong and secure, whilst remaining lightweight to allow for easy installation.
Constructed from cold rolled steel, these gates are robust, providing a high level of strength which will help to protect your site from intruders or vandals from attempting to enter by breaking through the pales themselves. The use of cold rolled steel in the construction of these palisade gates also helps to keep the weight to a minimum, helping to make transportation and installation of your gate as easy as possible.
To prevent would be intruders from attempting to climb over your gate in order to gain access to your site, each of the pales has a ‘W’ shaped profile. This profile shape makes it incredibly difficult to grip, making climbing incredibly difficult. To further deter access via climbing, each pale has a triple pointed tip as standard (single point and rounded and notched points are also available)
Our palisade gates have been designed to last, with each having a galvanised finish which complies to the BS EN ISO 1461:2009 standard. This protective coating will help to protect the steel from the damaging effects of weathering and rust.
The benefits to using palisade fencing and gates to secure your site:
- Its intimidating design will help to deter would be intruders from attempting to gain access to your site
- Strength and rigidity - The cold rolled steel construction provides a high level of strength, protecting your site from would be intruders
- Anti-climb design – the ‘W’ shaped profile of the pales and pale tips make it incredibly difficult for anyone to climb over
- Designed to last – Each gate is galvanised to BS EN ISO 1461:2009 standards and can also be Polyester Powder Coated for additional protection against weathering and rust
Delivery: We offer a delivery service from as little as £150+vat. dependant on location. Delivery typically depends on overall pallet sizes. Items are able to be hand lifted off the pallets should a forklift not be available. Usual surcharges apply for highlands/islands etc.
Lead Times Lead times vary. Please contact us with your requirements and a cost on delivery.
Note - Our images and models are for illustration purposes only. The actual product may vary slightly depending on design and size.
